Dynamic Solutions

Parke ViX Microstepping Drive/Controller

• Wizard-based configuration
• Up to 80 VDC bus voltage
• Compact size: 4.9 x 1.65 x 3.35 inches
• CE (EMC & LVD), UL compliant
• Storage of up to 16 sequences
• Registration, following, position maintenance, stall detection and conditional statements
• Standard RS232C ASCII interface
• Optional RS485/CANopen interface
• Integer selectable resolution from 200 to 51,200 steps/rev
• 5 digital inputs, 3 digital outputs, 1 analog input
• Anti-resonance circuitry suppresses mid-range instability
• Recommended motor inductance range of 0.5 mH to 20 mH
• Can take Step & Direction to operate as a drive-only

Parke Gemini GT6K Microstepping Drive/Controller

• Combines the powerful features of the 6K Controller with the Gemini GT digital microstepper drive for a complete standalone stepper solution in one small package
• Full ASCII communication capability and Ethernet communication
• Conrol features such as registration, mutitasking, PLC scan, electronic cam profiling, S-curve profiling, high-level math functionality and more
• Program storage: 300KB standard (battery backed)
• Daisy chain up to 99 units
• Simplified configuration and tuning
• 8 programmable inputs and 6 programmable outputs (expandable up to 256 I/O points)

The MForce MicroDrive Motion Control is a high performance microstepping driver integrated with a full featured programmable motion controller.

• RS-422/485 or CANopen communications
• 3.0 A RMS (4.2 A peak) output current
• +12 to +48 VDC input voltage
• Robust programmable I/O (up to 12 general purpose points) with input filtering
• Powerful instruction set with advanced math functions using 1-2 character mnemonics
• Step/Direction I/O for electronic gearing

Parker OFS 350-OSC Microstepping Drive/Controller

• Self contained Drive/Controller - no additional step controller required
• Easy to use - simply activate the RUN input with a manual pushbutton or an electronic switch closure
• On-board oscillator with accel, decel and speed control pots
• Add external pots, a joystick, or an analog signal for more sophisticated control
• Open frame design lowers cost and maximizes value
• Convenient screw terminal connectors
• 12,800 steps per revolution
• 12 - 42VDC input voltage
• Up to 3.5 A peak motor current per phase
• Drives size 11, 14, 17, 23 and 34 steppers