Home Product Controllers Stepper Drive/Controller

Stepper Drive / Controller

Copley Stepnet Plus 1-Axis Panel

Stepnet Plus TEL is a high-performance DC powered microstepping drive for control of hybrid stepping motors via EtherCAT using the CAN Application protocol for EtherCAT (CoE). Microstepping modes are Profile Position, Interpolated Position Mode (PVT), and Homing. With encoder feedback, the TEL can operate a stepper as a brushless servo motor, enabling Cyclic Sync Position/Velocity/ Torque operation.

As well as operating on EtherCAT networks, the TEL also supports the following traditional control modes: step/direction, RS-232 ASCII, master encoder for gearing and camming, digital input commands to initiate predetermined motion sequences.

Drive commissioning is fast and simple using CME 2™ software operating under Windows® and communicating with the TEL via RS-232 or an EtherCAT network.

Feedback from incremental and absolute encoders is supported. A multi-mode encoder port functions as an input or output depending on the drive’s basic setup. As an input it takes feedback from a secondary encoder to create a dual-loop position control system or as a master encoder for driving a cam table.

Read more: Copley Stepnet Plus 1-Axis Panel

Parker ViX Microstepping Drive/Controller

Parke ViX Microstepping Drive/Controller

  • Wizard-based configuration
  • Up to 80 VDC bus voltage
  • Compact size: 4.9 x 1.65 x 3.35 inches
  • CE (EMC & LVD), UL compliant
  • Storage of up to 16 sequences
  • Registration, following, position maintenance, stall detection and conditional statements
  • Standard RS232C ASCII interface
  • Optional RS485/CANopen interface
  • Integer selectable resolution from 200 to 51,200 steps/rev
  • 5 digital inputs, 3 digital outputs, 1 analog input
  • Anti-resonance circuitry suppresses mid-range instability
  • Recommended motor inductance range of 0.5 mH to 20 mH
  • Can take Step & Direction to operate as a drive-only

Read more: Parker ViX Microstepping Drive/Controller

Parker Gemini GT6K

Parke Gemini GT6K Microstepping Drive/Controller

  • Combines the powerful features of the 6K Controller with the Gemini GT digital microstepper drive for a complete standalone stepper solution in one small package
  • Full ASCII communication capability and Ethernet communication
  • Conrol features such as registration, mutitasking, PLC scan, electronic cam profiling, S-curve profiling, high-level math functionality and more
  • Program storage: 300KB standard (battery backed)
  • Daisy chain up to 99 units
  • Simplified configuration and tuning
  • 8 programmable inputs and 6 programmable outputs (expandable up to 256 I/O points)

Read more: Parker Gemini GT6K

IMS MForce MicroDrive Controller

The MForce MicroDrive Motion Control is a high performance microstepping driver integrated with a full featured programmable motion controller.

  • RS-422/485 or CANopen communications
  • 3.0 A RMS (4.2 A peak) output current
  • +12 to +48 VDC input voltage
  • Robust programmable I/O (up to 12 general purpose points) with input filtering
  • Powerful instruction set with advanced math functions using 1-2 character mnemonics
  • Step/Direction I/O for electronic gearing

Read more: IMS MForce MicroDrive Controller

ACS SPiiPlus PDMnt

The SPiiPlus PDMnt provides the ability to add up to four step motor and servo motor drives with Pulse/Dir interface to an EtherCAT network using any of ACS’ EtherCAT masters. Each of the drive interfaces consists of Pulse/Dir, limit switches, enable and fault feedback.

  • Four axis Pulse Direction interface Module for EtherCAT network
  • Open loop control of Servo or Step motor drives with Pulse/Direction interface
  • High frequency programmable pulse rate for triggering lasers
  • Up to 4M pulses per second
  • Eight digital inputs and eight digital outputs

Read more: ACS SPiiPlus PDMnt

Parker OFS Microstepping Drive/Controller

Parker OFS 350-OSC Microstepping Drive/Controller

  • Self contained Drive/Controller - no additional step controller required
  • Easy to use - simply activate the RUN input with a manual pushbutton or an electronic switch closure
  • On-board oscillator with accel, decel and speed control pots
  • Add external pots, a joystick, or an analog signal for more sophisticated control
  • Open frame design lowers cost and maximizes value
  • Convenient screw terminal connectors
  • 12,800 steps per revolution
  • 12 - 42VDC input voltage
  • Up to 3.5 A peak motor current per phase
  • Drives size 11, 14, 17, 23 and 34 steppers

Read more: Parker OFS Microstepping Drive/Controller

Southern California (Main Office): 9209 Research Drive • Irvine, CA 92618 • Ph: (949) 585-9009 • Fax: (949) 585-9218

Northern California: 1700 Wyatt Drive Suite 7 • Santa Clara, CA 95054 • Ph: (408) 327-0700 • Fax: (408) 327-0703