Omron STI Universal Safety Mats

Rugged Omron Scientific Technologies, Inc. Universal Safety Mats guard machine operators against some of the potential hazards and dangers of the modern manufacturing environment.

• Mat Type: Normally open SPST, four-wire
• Mode: Pressure Sensitive
• Mat Size: Standard sizes from 12 x 12 in. (305 x 305 mm) to 48 x 72 in. (1219.2 x 1829.8 mm)
  Metric sizes from 300 x 300 mm (11.8 x 11.8 in.) to 1200 x 1800 mm (47.2 x 70.9 in.)
• Activation Force: Detects adults > 30 kg. (66 lbs.)
• Mat Housing Cross Section: 13.5 mm (0.54 in.)
• Mat Cover Material: PVC
• Durometer: 80 (±3) shore A
• Mat Cable: 18-gauge, 4-conductor, 16-strand, 300 VAC, with MC12DC male single key connector. 5m (16 ft.) long.
• Operating Temperature: -37 to 66°C (-35 to 150° F)
• Environmental: IP67

Omron STI MC3 Controller

The MC3 safety mat controllers are used in conjunction with a four-wire, normally open, safety mat where perimeter guarding is required. These control reliable controllers send a stop signal to the guarded machine when an object of suffi cient weight is detected on the active mat area.

The MC3 DIN mount controller may be used in applications that do not require the feature set of the MC6 controller. The MC3 single zone mat controller has removable terminal blocks and operates only on 24 VDC.

Omron STI MC4 Controller

The MC4 safety mat controllers are used in conjunction with a four-wire, normally open, safety mat where perimeter guarding is required. These control reliable controllers send a stop signal to the guarded machine when an object of suffi cient weight is detected on the active mat area.

The MC4 is a NEMA 4, 12 rated single zone mat controller. This controller may be used in applications when the diagnostic features of the MC6 may not be required. The MC4 may be ordered in either 24 VDC or the universal auto-selecting power supply for 100-240 VAC.

Omron STI MC6 Controller

The MC6 safety mat controllers are used in conjunction with a four-wire, normally open, safety mat where perimeter guarding is required. These control reliable controllers send a stop signal to the guarded machine when an object of suffi cient weight
is detected on the active mat area.

The MC6 is a NEMA 4, 12 controller with six individual mat zone indicators and is designed to be backward compatible with the MC4. Both units are dimensionally identical. This is where the similarities stop: The MC6 has full featured diagnostics with a 24 VDC and an optional universal power supply (100-240 VAC autoselecting). It is a controller that can be used anywhere in the world.